E-mail: info@sanmak.com
Tel: +86-757-81248088
Contact Us

Sanmak Lighting Co.,Ltd

Tel:+86-757-81248088/81248099

Phone: +8615989038225

Fax: 0757-81248088-8065

E-mail: info@sanmak.com

Website: www.sanmak.com

You are here: Home > Technical Support > Content

About Company

LED Work Light The Role
Aug 04, 2017

Machine work lights since the advent of its high brightness and energy saving and was relish, but things always exist on both sides, there are good and bad. Although some lack, LED Work Light but LED machine work lights so many advantages, under the technical development, will overcome all the lack of, and then eventually replace the use of halogen tungsten and incandescent machine lamp.

A single lamp power is low, in order to obtain a large power, LED Work Light many of the few may be used in parallel to achieve the desired role. Color rendering index is low, that is, under the bulb to see things are not incandescent or so tungsten halogen so real, there is a sense of divergence, LED Work Light easy to form a visual error and misjudgment, in the mechanical operation of the beginning of the time is very suited to use The Machine work light bulb life can be up to 60,000 hours, a recent use of 60 years can continue to use the light bulb is made so that the use of light bulbs have made greater progress, and even more than the number of human life. LED Work Light In addition to the long use of life, the bulb of electricity efficiency can not be ignored, it is more than the general operation of the halogen lamp machine lamp and incandescent machine lamp 80% energy saving. LED Work Light Because he is a cold light, almost no heat, so the machine work in a narrow range of work will not be due to fever is too high and burst. Other machine work lights can accept a greater momentum, especially suitable for the use of machinery and equipment. It luminous environmental protection, light effect pollution.

Machine work light is the first set of the highest brightness, LED Work Light energy saving, the use of the largest number of up to 50000 hours, and machine life using the number of simultaneous, the use of the lowest cost, color index is the best, health care, no maintenance of the most advanced machine working lamp. The new LED machine work light selection of the most advanced technology, reasonable planning, LED Work Light beautiful appearance, waterproof and dustproof, perfect circuit maintenance function, LED Work Light there is no similar domestic goods, with the first domestic, the international first to level.

LED lights are widely automotive industry, the common LED work lights, LED off-road headlights, LED lights, LED car lights and so on. LED response speed, you can reduce the car rear-end accident. LED is actually an electroluminescent semiconductor chip, fixed with a fixed glue to the bracket, LED Work Light then use the gold wire to connect the chip and circuit board, and then sealed with epoxy resin, the maximum protection of the internal core, and finally install the shell, so LED work lights have good seismic performance. LED work lamp shell material quality directly affect the life of LED work lights, is the market commonly used led lamp using aluminum mostly.

Advantages of aluminum alloy:

1. Surface treatment process is mature, such as anodizing, electrophoresis, and retain good thermal conductivity

2. Organization is relatively dense, strength and hardness are high, good wear resistance and corrosion resistance;

3. High dimensional accuracy

4. Good temperature performance, led lamp beads performance optimization