E-mail: info@sanmak.com
Tel: +86-757-81248088
Contact Us

Sanmak Lighting Co.,Ltd


Phone: +8615989038225

Fax: 0757-81248088-8065

E-mail:  info@sanmak.com

Website: www.sanmak.com

About Company

LED Work Light High Service Life
Oct 23, 2017

LED work lights using high-brightness LED as a light source, the service life of up to 100,000 hours, heat a small. Lamps have: dust, moisture resistance, corrosion-resistant effect. Halogen bulb work light: the use of new light source halogen bulb, light soft, good condenser, LED work lights for all, LED Work Light small machine tools, CNC bed, drilling and milling machine, combined with machine tools and other equipment lighting, and waterproof explosion , Put the advantages of erosion and so on.

LED work lights are different from other machine work light source, then, LED work light source features:

1. Voltage: LED using low-voltage power supply, LED Work Light the supply voltage between 6-24V, depending on the product varies, so it is a more secure than the use of high-voltage power supply, especially for public places;

2. Effectiveness: 80% reduction in energy consumption compared to incandescent light;

3. Applicability: very small, each unit LED chip is 3-5mm square, it can be prepared into a variety of shapes of the device, and suitable for variable environment;

4. Stability: 100,000 hours, the light failure for the initial 50%;

5. Response time: the response time of its incandescent milliseconds, LED light response time for the nanosecond;

6. Environmental pollution: no harmful metal mercury;

7. Color: change the current can be discolored, LED Work Light light-emitting diode easily through the chemical modification method, adjust the material band structure and band gap, to achieve red, yellow, green orchid orange multi-color light. Such as small current when the red LED, with the increase in current, can turn into orange, yellow, and finally green;

8. Price: LED price is more expensive, LED Work Light compared to incandescent, a few LED prices can be the price of an incandescent lamp, and usually each group of lights need to be composed of 300 to 500 diodes.

Mobile LED work lights and energy-saving lamps in addition to the different principles of light, in environmental protection and energy conservation, service life, LED Work Light stability is also very significant difference. Compared with energy-saving lamps, mobile LED work lights more energy efficient. Mobile LED work lights consume energy is 25% of energy-saving lamps, this is because the ordinary energy-saving lamps still consume part of the energy into heat, and mobile LED work lights do not have this problem. The life of the movable LED work lamp is longer, and the service life of qualified LED bulbs can reach 10,000 to 20,000 hours, LED Work Light while the same energy saving lamp has a service life of between 6,000 and 10,000 hours. Movable LED work lights are more environmentally friendly. Mercury is one of the essential luminescent materials for energy-saving lamps. With the increase in the use of time, LED Work Lightthe sealing of energy-saving lamps will occur, and the mercury will evaporate into the air and cause air pollution. Mobile LED work lights do not have this problem, LED Work Light the use of safe and environmentally friendly. LED Work Light Movable LED work lights in the lightning protection performance far more than energy-saving light bulbs. Voltage instability caused by the continuous switch on the impact of mobile LED work lights is much smaller than the energy-saving lamps. And energy-saving lamps if frequent switching, the service life will be greatly reduced.