E-mail: info@sanmak.com
Tel: +86-757-81248088
Contact Us

Sanmak Lighting Co.,Ltd

Tel:+86-757-81248088/81248099

Phone: +8615989038225

Fax: 0757-81248088-8065

E-mail:  info@sanmak.com

Website: www.sanmak.com

About Company

Detection Lights Widely Used
May 26, 2017

Fluorescence detection bulb (mushroom type, olive type) output 3650 spectra, high concentration of energy, narrow spectral radiation, Detection Lights no visible interference. Its 3650 ultraviolet radiation intensity at 38cm Test average above 3000um CM2, is the police fluorescence analysis and a variety of metal fluorescence flaw analysis of the ideal light source, can be widely used in automotive manufacturing, aircraft manufacturing, railways, Detection Lights photochemical, metallurgical machinery manufacturing, mining, textile, food processing and other industries.

Please observe the following precautions when using light bulbs:

1 light bulb Because of the use of 3650A °, Detection Lights ultraviolet light of the special glass manufacturing, the glass is more easily broken than ordinary glass, so in the transport and installation process must be handled lightly.

2 The bulb must be installed correctly on a line with 125W ballast in series.

3 after the power supply to 8 minutes or so, Detection Lights ultraviolet radiation intensity to achieve a stable luminous use.

4 light bulbs in the passage of a period of time after the shutdown of the line, if necessary to use again, the second open before the need to stay about 15 minutes, the bulb inside the tube cooled down and then open can be used.

5 prevent the bulb from breaking by strongly shaking the bulb and splashing water and other liquids into the bulb during use.

The precise technical name of a light bulb (or electric bulb) is an incandescent lamp that heats the filament (modern, usually tungsten) to incandescent, Detection Lights using electrical resistance to glow. The outer part of the bulb is made of glass, keeping the filament in a vacuum, or under a low-pressure inert gas, to prevent the filament from oxidizing at high temperatures. Refer to the incandescent lamp. It is generally believed that the electric lamp was invented by American Thomas Eddison. But if serious textual criticism, another American Henry Gold (Heinrich Gabel) has invented the same principle and material for decades earlier than Edison. 1801 light bulb, British chemist David will glow platinum wire. He also invented the electric candle in 1810, using the arc lighting between two carbon rods. In 1854, Henry Gold used a carbonized bamboo wire to glow under a vacuum glass. His invention today appears to be the first effective incandescent lamp. He had been experimenting with the bulb for 400 hours, but did not immediately apply for a design patent. The biggest problem with the bulb is the sublimation of the filament. Because of the slight difference in the resistance of tungsten wires caused by different temperature, in the place of greater resistance, Detection Lights the temperature rose higher, tungsten wire also sublimation faster, so that the tungsten wire become thinner, the resistance of the further increase cycle; It was found that substituting inert gas for vacuum can slow down the sublimation of tungsten filament. Most of today's bulbs are infused with nitrogen, argon or krypton. Modern incandescent lamps typically have a lifespan of about 1,000 hours.